Hikvision DS-3WF500T-EI-2N/P Wireless Bridge
Review manufacturer-documented connectivity, capacity and installation information for Hikvision DS-3WF500T-EI-2N/P. Compare port roles, power requirements and compatibility conditions using this exact model's technical table.
Product description
The manufacturer lists this Max. Transmission Rate of Air Interface specification for Hikvision DS-3WF500T-EI-2N/P: ≤ 300 Mbps. Plan connections for this exact model. Distinguish endpoint and upstream connections rather than counting ports with different speeds and roles as equivalent links.
Listed Wireless Standard: IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps). Retain the scope of this specification; aggregate switching capacity, per-port link speed and achieved end-to-end throughput are different measurements. Plan network load alongside protocol and connection conditions.
The manufacturer specifies this PoE PoE Port: AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT. Distinguish PoE ports from total ports and each port's limit from the device's aggregate power budget. Check powered-device classes and cable conditions against this exact model's technical table.
Installation specification for Working Temperature: -30 °C to 60 °C (-22 °F to 140 °F). Evaluate the operating environment and enclosure requirements against these limits. Plan cabling, power and connection protection using the installation documentation.
Technical Specifications
| Net Weight | 0.26 kg (0.57 lb) per device |
|---|---|
| Gross Weight | 1.1 kg (2.43 lb) |
| Packing List | Wireless Bridge × 2,PoE Power Supply × 2,AC Cord × 2,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1,Binding Tape × 4 |
| Packing Method | Packing in pairs |
| Storage humidity | 5% to 95% (no condensation) |
| Working Humidity | 5% to 95% (no condensation) |
| Installation Mode | Pole Mounting |
| Power Consumption | 2.43 W for typical (1-ch 2MP IPC), Max. 3.4 W |
| Ingress Protection | IP55 |
| Storage temperature | -40 °C to 80 °C (-40 °F to 176 °F) |
| Working Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Package Dimensions (W × H × D) | 256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38") |
| Product Dimensions (W × H × D) | 90.8 mm × 187.87 mm × 57.87 mm (3.58'' × 7.4'' × 2.28'') |
| EMC | CE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3) |
|---|---|
| Radio | EN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN 300 328, EN IEC 62311 |
| Safety | CB (IEC 62368-1),CE-LVD (EN 62368-1) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| PoE Port | AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT |
|---|---|
| PoE Distance | 100 m |
| PoE Power Budget | 10 W |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate. 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning 8. PoE output management |
|---|---|
| Upgrade | Web,iVMS-4200,HCP,HPP |
| System Log | Syslog,Control center information |
| Channel Width | 10/20/40 MHz |
| Security Mode | WPA2-PSK |
| Network Protocol | NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging) |
| Channel Selection | Auto/manual selection |
| Management Method | HCP,Web,HPP,iVMS-4200 |
| Security Mechanism | Wireless network name hidden |
| Application Function | IFM,IPM |
| Reset | Hardware resetting button |
|---|---|
| Power Supply | 48V PoE;Check the physical interface image below for more details. |
| LED Indicator | Power indicator,LAN indicator,Signal intensity indicator |
| Network Interface | 2 × 10/100 Mbps RJ45 ports |
| Antenna Gain | 7 dBi |
|---|---|
| Antenna Angle | (H) Beamwidth [3 dB] 60° (V) Beamwidth [3 dB] 50° |
| Throughput Rate | PTP: ,80 Mbps/0.2 KM(HT40),40 Mbps/0.5 KM(HT40) |
| Wireless Standard | IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps) |
| Transmitting Power | 22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.) |
| Receiving Sensitivity | -87±2 dBm @HT40 MCS0 |
| Working Frequency Band | 2400 MHz ~ 2483.5 MHz |
| Max. Transmission Rate of Air Interface | ≤ 300 Mbps |