Hikvision DS-3WF5000-SI-5ACG/2P Wireless Bridge
Review manufacturer-documented connectivity, capacity and installation information for Hikvision DS-3WF5000-SI-5ACG/2P. Compare port roles, power requirements and compatibility conditions using this exact model's technical table.
Product description
The manufacturer lists this Max. Transmission Rate of Air Interface specification for Hikvision DS-3WF5000-SI-5ACG/2P: ≤ 867 Mbps. Plan connections for this exact model. Distinguish endpoint and upstream connections rather than counting ports with different speeds and roles as equivalent links.
Listed Wireless Standard: IEEE 802.11/a/n/ac. Retain the scope of this specification; aggregate switching capacity, per-port link speed and achieved end-to-end throughput are different measurements. Plan network load alongside protocol and connection conditions.
The manufacturer specifies this PoE PoE Port: AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT, LAN3 802.3 af PoE OUT. Distinguish PoE ports from total ports and each port's limit from the device's aggregate power budget. Check powered-device classes and cable conditions against this exact model's technical table.
Installation specification for Working Temperature: -30 °C to 65 °C (-22 °F to 149 °F). Evaluate the operating environment and enclosure requirements against these limits. Plan cabling, power and connection protection using the installation documentation.
Technical Specifications
| Net Weight | 0.54 kg (1.19 lb) per device |
|---|---|
| Gross Weight | 2.76 kg (6.08 lb) |
| Packing List | Wireless Bridge x 2, PoE Adapter (48.0V, 1.0A) x 2, Power Cord x 2, Universal Joint Nut x 2, Universal Joint x 2, Mounting Bracket x 2, Screw Pack x 2, Hose Clamp x 2, Quick Start Guide x 1, Regulatory Compliance and Safety Information x 1 |
| Packing Method | Packing in pairs |
| Storage humidity | 5% to 95% (no condensation) |
| Working Humidity | 5% to 95% (no condensation) |
| Installation Mode | Wall Mounting,Pole Mounting |
| Power Consumption | 3.5 W for typical (1-ch 2MP IPC), Max. 7.7 W |
| Ingress Protection | IP55 |
| Storage temperature | -40 °C to 80 °C (-40 °F to 176 °F) |
| Working Temperature | -30 °C to 65 °C (-22 °F to 149 °F) |
| Package Dimensions (W × H × D) | 341 mm × 360 mm × 100 mm (13.43" × 14.17" × 3.94") |
| Product Dimensions (W × H × D) | 134.21 mm × 235.00 mm × 58.73 mm (5.28'' × 9.25'' × 2.31'') |
| EMC | CE-EMC(EN 55032, EN 61000-3-3, EN IEC 61000-3-2, EN 50130-4, EN 55035) |
|---|---|
| Radio | EN 301 893,EN 300 440,EN 301 489-3,EN 301 489-17,EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN IEC 62311 |
| Safety | CB (IEC 62368-1),CE-LVD (EN 62368-1) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| PoE Port | AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT, LAN3 802.3 af PoE OUT |
|---|---|
| PoE Distance | 100 m |
| Max. Port Power | 28 W |
| PoE Power Budget | 40 W |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate. 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning 8. PoE output management |
|---|---|
| Upgrade | Web,iVMS-4200,HCP,HPP |
| System Log | Syslog,Control center information |
| Channel Width | 20/40/80 MHz |
| Security Mode | WPA2-PSK |
| Network Protocol | NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging) |
| Channel Selection | Auto/manual selection |
| Management Method | HCP,Web,iVMS-4200,HPP |
| Security Mechanism | Wireless network name hidden |
| Application Function | IFM,IPM,DFS,TPC |
| Reset | Hardware resetting button |
|---|---|
| Power Supply | 48V PoE/12~24V DC;Check the physical interface image below for more details. |
| LED Indicator | Power indicator,LAN indicator,Signal intensity indicator |
| Network Interface | 3 × 100/1000 Mbps RJ45 ports |
| Antenna Gain | 16 dBi |
|---|---|
| Antenna Angle | (H) Beamwidth [3 dB] 32° (V), Beamwidth [3 dB] 17° |
| Throughput Rate | PTP:290 Mbps/1 KM(AC80), 270 Mbps/3 KM(AC80), 250 Mbps/5 KM(AC80); PTMP(1 to 8): 150 Mbps/5KM(AC80) |
| Wireless Standard | IEEE 802.11/a/n/ac |
| Transmitting Power | 29 dBm @11ac 80MHz MCS0 (Note: Transmitting power may vary with local regulations.) |
| Receiving Sensitivity | -88 ±2dBm@AC80-MCS0 |
| Working Frequency Band | 5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5825 MHz |
| Max. Transmission Rate of Air Interface | ≤ 867 Mbps |