Hikvision DS-3WF1000S-EI-2N Wireless Bridge
Review manufacturer-documented connectivity, capacity and installation information for Hikvision DS-3WF1000S-EI-2N. Compare port roles, power requirements and compatibility conditions using this exact model's technical table.
Product description
The manufacturer lists this Max. Transmission Rate of Air Interface specification for Hikvision DS-3WF1000S-EI-2N: ≤ 300 Mbps. Plan connections for this exact model. Distinguish endpoint and upstream connections rather than counting ports with different speeds and roles as equivalent links.
Listed Wireless Standard: IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps). Retain the scope of this specification; aggregate switching capacity, per-port link speed and achieved end-to-end throughput are different measurements. Plan network load alongside protocol and connection conditions.
Power specification: 1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W. Select the supply and connections against the listed input requirements. Power-supply or adapter support alone does not establish PoE output from network ports or inclusion of an adapter.
Installation specification for Working Temperature: -30 °C to 60 °C (-22 °F to 140 °F). Evaluate the operating environment and enclosure requirements against these limits. Plan cabling, power and connection protection using the installation documentation.
Technical Specifications
| Net Weight | 0.26 kg (0.57 lb) per device |
|---|---|
| Gross Weight | 0.54 kg (1.19 lb) |
| Packing List | Wireless Bridge × 1,Power Adapter (12 VDC, 1 A) × 1,10/100 Mbps PoE Injector × 1,Binding Tape × 2,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1 |
| Packing Method | Single unit packing |
| Storage humidity | 5% to 95% (no condensation) |
| Working Humidity | 5% to 95% (no condensation) |
| Installation Mode | Pole Mounting |
| Power Consumption | 1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W |
| Ingress Protection | IP55 |
| Storage temperature | -40 °C to 80 °C (-40 °F to 176 °F) |
| Working Temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Package Dimensions (W × H × D) | 132 mm × 228 mm × 91 mm (5.19" × 8.97" × 3.58") |
| Product Dimensions (W × H × D) | 90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'') |
| EMC | CE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3) |
|---|---|
| Radio | EN 301 489-17,EN EN 301 489-1, EN 61000-3-3, EN IEC 61000-3-2, EN 300 328, EN IEC 62311 |
| Safety | CB (IEC 62368-1),CE-LVD (EN 62368-1) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning |
|---|---|
| Upgrade | Web,iVMS-4200,HCP,HPP |
| System Log | Syslog,Control center information |
| Channel Width | 10/20/40 MHz |
| Security Mode | WPA2-PSK |
| Network Protocol | NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging) |
| Channel Selection | Auto/manual selection |
| Management Method | HCP,Web,iVMS-4200,HPP |
| Security Mechanism | Wireless network name hidden |
| Application Function | IFM,IPM |
| Reset | Hardware resetting button |
|---|---|
| Power Supply | 12-24 VDC Passive PoE |
| LED Indicator | Power indicator,LAN indicator,Signal intensity indicator |
| Network Interface | 2 × 10/100 Mbps RJ45 ports |
| Antenna Gain | 7 dBi |
|---|---|
| Antenna Angle | (H) Beamwidth [3 dB] 60°, (V) Beamwidth [3 dB] 50° |
| Throughput Rate | PTP: 90 Mbps/0.2 KM(HT40),90 Mbps/0.5 KM(HT40),70 Mbps/1 KM(HT40),PTMP(1 to 4): 40 Mbps/1 KM(HT40) |
| Wireless Standard | IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps) |
| Transmitting Power | 22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.) |
| Receiving Sensitivity | -87±2 dBm @HT40 MCS0 |
| Working Frequency Band | 2400 MHz ~ 2483.5 MHz |
| Max. Transmission Rate of Air Interface | ≤ 300 Mbps |