Hikvision DS-3WAP623E-SI Wireless Access Point
Review manufacturer-documented connectivity, capacity and installation information for Hikvision DS-3WAP623E-SI. Compare port roles, power requirements and compatibility conditions using this exact model's technical table.
Product description
The manufacturer lists this Interface specification for Hikvision DS-3WAP623E-SI: 1 × Gigabit RJ45 uplink port. Plan connections for this exact model. Distinguish endpoint and upstream connections rather than counting ports with different speeds and roles as equivalent links.
Listed Working Frequency Band: radio 1: 5G(11a/n/ac/ax), radio 2: 2.4G(11b/g/n/ax). Retain the scope of this specification; aggregate switching capacity, per-port link speed and achieved end-to-end throughput are different measurements. Plan network load alongside protocol and connection conditions.
Power specification: Max. 14.4 W. Select the supply and connections against the listed input requirements. Power-supply or adapter support alone does not establish PoE output from network ports or inclusion of an adapter.
Installation specification for Working Temperature: -30 °C to 55 °C (-22 °F to 131 °F). Evaluate the operating environment and enclosure requirements against these limits. Plan cabling, power and connection protection using the installation documentation.
Technical Specifications
| Weight | 1.07 kg (2.35 lb) |
|---|---|
| IP Rating | IP68 |
| Packing List | 3000 M Access Point ×1,Screw Pack × 1,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1 |
| Storage humidity | 5% to 95% (no condensation) |
| Working Humidity | 5% to 95% (no condensation) |
| Installation Mode | Wall-Mounted,Pole |
| Power Consumption | Max. 14.4 W |
| Storage temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
| Working Temperature | -30 °C to 55 °C (-22 °F to 131 °F) |
| Product Dimensions (W × H × D) | 102 mm × 110 mm × 250 mm (3.97'' × 4.33'' × 9.84'') |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|---|---|
| Radio | EN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17 |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017),UL (UL 60950-1) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| Wi-Fi Speed | 2.4 G: 575 Mbps,5 G: 2400 Mbps |
|---|---|
| Antenna Gain | 2.4 GHz: 10 dBi,5 GHz: 5 dBi |
| Antenna Type | Built-in omnidirectional antennas |
| Channel Width | 2.4 GHz: Auto/20 /40 MHz,5 GHz: Auto/20 /40 /80/ 160MHz |
| Transmit Power | 23 dBm |
| Spatial Streams | 2.4 GHz, 2 × 2 , MU-MIMO, 5 GHz, 2 ×2 , MU-MIMO |
| Wi-Fi Standards | Wi-Fi 6 |
| Number of Antennas | 2.4GHz：2；5GHz：2 |
| Modulation Technology | OFDM: BPSK@6/9Mbp, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps; DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps; MIMO-OFDM (11n): MCS 0-15; MIMO-OFDM (11ac): MCS 0-9 |
| Working Frequency Band | radio 1: 5G(11a/n/ac/ax), radio 2: 2.4G(11b/g/n/ax) |
| Maximum Number of SSIDs | 8 |
| Maximum Number of Clients | 256 |
| Recommended Number of Clients | 100 |
| Interface | 1 × Gigabit RJ45 uplink port |
|---|---|
| Power Supply | IEEE 802.3af/at POE,48 VDC 0.3A |
| LED Indicator | Yellow/green/blue for different working states, flashing mode |
| WLAN Security | WAP-PSK,WAP2-PSK,WPA-WAP2-PSK,Blocklist & Allowlist,Support Multiple encryption key triggered dynamic unicast/multicast key update,Support Open system/shared key authentication,Support wireless endpoint access,Support 802.11i,Support SSID and VLAN binding |
|---|---|
| Version Upgrade | upgrade on Web |
| Management & Maintenance | Centralized AC management |