Güvenlik Online Logo
Model Code: DS-3T1506HP-EI-UPS

Hikvision DS-3T1506HP-EI-UPS Network Switch

Review manufacturer-documented connectivity, capacity and installation information for Hikvision DS-3T1506HP-EI-UPS. Compare port roles, power requirements and compatibility conditions using this exact model's technical table.

Product description

The manufacturer lists this Ports specification for Hikvision DS-3T1506HP-EI-UPS: 4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port. Plan connections for this exact model. Distinguish endpoint and upstream connections rather than counting ports with different speeds and roles as equivalent links.

Listed MAC Address Table: 2 K. Retain the scope of this specification; aggregate switching capacity, per-port link speed and achieved end-to-end throughput are different measurements. Plan network load alongside protocol and connection conditions.

The manufacturer specifies this PoE PoE Standard: Port 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings. Distinguish PoE ports from total ports and each port's limit from the device's aggregate power budget. Check powered-device classes and cable conditions against this exact model's technical table.

Installation specification for Operating Temperature: -40 °C to 75 °C (-40 °F to 167 °F). Evaluate the operating environment and enclosure requirements against these limits. Plan cabling, power and connection protection using the installation documentation.

Technical Specifications

General
ShellMetal material, IP30
Net Weight0.7 kg (1.54 lb)
Gross Weight1.16 kg (2.56 lb)
Power Supply12V DC, 10A or 24V DC, 5A; 54V 2.22A
Surge Protection6 kV
Installation ModeDesk-Mounted,Rail,Wall-Mounted
Relative Humidity5% to 95% (no condensation)
Operating humidity5% to 95% (no condensation)
Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Temperature-40 °C to 75 °C (-40 °F to 167 °F)
Max. Power Consumption120 W
Dimensions (W × H × D)158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')
Power Consumption in Idle2 W
Approval
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
PoE Power Supply
PoE PortHi-PoE: Port 1 PoE: Ports 2 to 4
PoE StandardPort 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings
PoE Power PinPort 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output
Max. Port PowerPort 1: 90 W Ports 2 to 4: 30 W
PoE Power BudgetDC 54 V input: 110 W DC 12 V~24 V input: 60 W
Software Function
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode.
VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
Long RangePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
Port IsolationPorts 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS.
Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s).
System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
DDM (Digital Diagnostic Monitoring)Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.
Network Parameters
Ports4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port
Internal Cache1 Mbits
MAC Address Table2 K
Switching CapacityWhole-Device Performance: 14 Gbps Port Performance: 12 Gbps
Packet Forwarding RateWhole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps

Cookie preferences

Essential storage supports site features and remembers your choice. Consent-based Google analytics depends on your choice and separate activation. Advanced Mode is off by default; if separately enabled, it may send cookieless signals under denied consent. If activated, Umami measures pageviews independently of cookie choices. Read the Cookie Policy

Essential — always active

Session security and remembering your cookie preference.

Usage measurement for pages, searches and sponsor interactions; Google Analytics / Google Tag Manager when configured.

Use of advertising-related cookies. Contextual sponsor placements may still appear without this permission.

Preference for sharing user data with Google advertising services. No such transfer occurs unless separately enabled.

Preference for Google ad personalization, independent of analytics permission.

You can change or withdraw your choices using Cookie preferences in the footer.