Güvenlik Online Logo
Technical Article

Warehouse Camera System: Current Regulations, Technical Specifications and Recording Guide

Sistem Yöneticisi25 min read

Warehouse camera systems are subject to specific technical requirements to ensure the security of goods under customs supervision and the traceability of operations. We examine the Ek-80/III requirements for 1080p/15 FPS and 720p/10 FPS cameras, the one-year recording retention period, RAID 5/6 storage, UPS, ONVIF, tamper alerts, and the selection of NVR/VMS systems. We provide an up-to-date practical guide covering recording capacity calculations, site acceptance tests, and the 2024 regulatory amendments.

Antrepo ve lojistik depolama alanlarında IP güvenlik kameraları, PTZ kamera, yükleme alanı gözetimi ve merkezi CCTV izleme sistemleri.

Warehouse camera systems are professional CCTV solutions used to secure goods under customs supervision, record entry and exit movements, and make inspection and handling operations traceable. IP security cameras, NVRs or video-management software, high-capacity storage systems, uninterruptible power supplies and remote-monitoring infrastructure form the core components of these systems.

Camera systems used in customs warehouses have technical requirements that differ from those of standard warehouse security cameras. In Türkiye, one of the principal regulatory sources for these requirements is the Customs Regulation Ek-80/III — Camera Systems Located in Warehouses section.

The relevant regulation sets out various requirements, from camera positioning, resolution and frame rate to recording duration, storage redundancy, tampering alerts and remote-access functions.

In particular, retaining camera recordings for one year and using RAID 5 or RAID 6 in the recording infrastructure mean that storage capacity must be carefully calculated for warehouse projects.

However, simply installing cameras, having a functioning recorder or providing high-capacity disks does not guarantee regulatory compliance.

A compliant warehouse camera system monitors the required areas at appropriate image quality, preserves recording integrity, reports faults and has had its technical requirements verified through site testing.

What Is a Warehouse Camera System?

A warehouse camera system is a video-surveillance infrastructure established to view designated areas and monitor relevant activities at warehouse facilities holding goods subject to customs supervision.

Depending on the type of warehouse and regulatory requirements, the system may comprise the following components:

  • Fixed IP security cameras.

  • Suitable outdoor camera systems.

  • NVR- or server-based video-recording infrastructure.

  • RAID-supported storage system.

  • PoE switches and network equipment.

  • Fiber-optic or Ethernet communications infrastructure.

  • Uninterruptible power supply.

  • Camera tampering and fault-detection system.

  • Suitable email-alert notification infrastructure.

  • Video management software (VMS).

  • Authorized remote access.

  • Recording, system and user-activity logs.

The system’s purpose is not limited to viewing security incidents.

Supporting customs supervision in warehouses, ensuring the traceability of goods movements and preserving recordings for relevant audits are also important.

Are Camera Systems Mandatory in Warehouses?

In Türkiye, camera requirements for customs warehouses are assessed under the Customs Regulation and related regulations.

Article 93 of Customs Law No. 4458, is one of the principal provisions governing warehouses and customs supervision.

The Ek-80 section of the Customs Regulation sets out the characteristics of camera systems, alongside the conditions for opening and operating warehouses.

Ek-80/III sets out the general and minimum technical requirements for warehouse camera systems.

However, exceptions may apply depending on the type or legal status of a warehouse, or under specific administrative regulations.

For example, Circular No. 2013/3 of the Ministry of Trade on warehouse procedures specifies an exception to camera installation for certain general warehouses belonging to the General Directorate of PTT, which operates general warehouses, and its affiliates.

Therefore, it should not be assumed that there are no exceptions for all storage facilities or every type of warehouse . A blanket assessment of this kind should be avoided.

Before starting a project, verify the status of the relevant warehouse, the applicable regulations and the current requirements of the competent customs authority.

What Is Customs Regulation Ek-80/III?

The Customs Regulation Ek-80/III is the section governing the technical and functional requirements for camera systems to be installed in warehouses.

The regulation addresses four main areas:

  1. General camera-system characteristics.

  2. Minimum technical specifications.

  3. Camera software and recording system.

  4. Additional camera placements for fuel and special-goods warehouses.

This framework means that camera systems must be assessed not only for device specifications, but also for implementation and operation.

Difference Between Old Ek-81/B and Ek-80/III

Some old technical specifications circulating in the industry include the expression Ek-81/B . This expression is found in some old technical specifications.

In current consolidated regulations, warehouse camera-system requirements Ek-80/III are listed under the heading.

Accordingly, using old specifications without revision may result in outdated provisions and requirements being carried over into projects.

The amendment dated 20 April 2024 should be taken into account in particular.

What Changed in Warehouse Camera Regulations in 2024?

With the amendment to the Customs Regulation published in the Official Gazette dated 20 April 2024, issue No. 32523, Article 24 of Ek-80/III, section A—General Characteristics, was repealed.

That article required IP cameras, video-recording and management devices, and monitoring software to be from the same manufacturer.

Therefore, it is not correct to repeat as a general requirement in the current text the condition in earlier technical documents that “all cameras, recording devices and management software must be of the same brand” as a general requirement in the current text.

However, this amendment does not mean that all devices from different manufacturers will work together without problems.

In projects that combine different brands, video, recording, alarm, authorization and remote-access functions should be tested separately.

Minimum Resolution and FPS Values for Warehouse Cameras

Under Ek-80/III, camera resolution and frame rate vary according to the function of the area being monitored.

Camera Placement and Minimum Performance Table

Warehouse area

Minimum resolution

Minimum frame rate

Warehouse site entrances and exits

1920 × 1080 (1080p)

15 FPS

Warehouse doors

1920 × 1080 (1080p)

15 FPS

Goods inspection areas

1920 × 1080 (1080p)

15 FPS

Handling areas

1920 × 1080 (1080p)

15 FPS

Suitable points for goods entry and exit

1920 × 1080 (1080p)

15 FPS

General indoor monitoring

1280 × 720 (720p)

10 FPS

General outdoor monitoring

1280 × 720 (720p)

10 FPS

These values summarize the minimum requirements in the relevant general-characteristics section of Ek-80/III.

However, it should not be assumed that a camera with 1080p resolution and 15 FPS will provide sufficient image detail at every entrance or inspection point.

Depending on the imaging task, higher resolution, a different lens or an additional camera may be needed.

Blind-spot requirements applicable to general surveillance areas should also be considered when planning the site layout.

How Should Warehouse Cameras Be Positioned?

The primary aim of camera placement in a warehouse is to reliably capture movements of goods subject to customs supervision and designated critical operations.

Warehouse Entrances and Exits

Areas where vehicles and goods enter and leave are priority points for camera placement.

When selecting cameras, consider:

  • The direction of vehicle and cargo movements.

  • The width of the door or passage.

  • Daylight and backlighting.

  • Obstructions to the view caused by forklifts and vehicles.

  • Camera mounting height.

  • Night-time lighting.

These factors

Goods Inspection Areas

Areas where goods inspections take place must be covered appropriately by the imaging system.

However, a single wide-angle camera covering the entire area may not show the operations being performed in sufficient detail.

The required imaging objectives should be defined during the project.

Handling Areas

Image quality is important during loading, unloading, sorting and other handling activities.

In these areas, shelves, pallets, forklifts and other equipment may affect the cameras’ field of view.

Outdoor Warehouse Areas

Camera placement in outdoor warehouse areas should be assessed with a view to reducing blind spots.

A single camera may not be sufficient because of long distances, outdoor conditions and the terrain.

Storage and Shelving Areas

In high-rack systems, the view of cameras may be obstructed by upper rack levels or stored products.

For this reason, field-of-view tests should be conducted based on the actual warehouse layout.

DORI and PPM Calculations for Warehouse Camera Systems

For warehouse cameras, image detail at the target distance is as important as resolution.

PPM (Pixels Per Meter) indicates how many pixels correspond to a one-meter horizontal area on a specified target plane.

PPM = Number of horizontal pixels in the image / Horizontal field of view on the target plane

Example PPM Calculation

If an IP camera with 1920 horizontal pixels views an area 8 meters wide at a goods inspection point:

1920 / 8 = 240 PPM

This result is the theoretical horizontal pixel density on the target plane in question.

By itself, however, it does not guarantee that specific product labels or details of small objects will be legible in the camera image.

Actual image quality is affected by:

  • Target size.

  • Lens quality.

  • Focus.

  • Mounting angle.

  • Lighting.

  • Motion blur.

  • Video compression

also has an effect.

IEC 62676-4:2025, an up-to-date international practical guide that can be used to plan, install, and test video surveillance systems.

Once the minimum camera specifications under warehouse regulations have been met, on-site imaging performance should also be verified using engineering methods of this kind.

How Long Must Warehouse Camera Recordings Be Kept?

One of the most important considerations in warehouse CCTV projects is the retention period for recordings.

Article 6 of the A—General Characteristics section of Customs Regulation Ek-80/III requires that relevant camera recordings be retained for one year from the recording date for each camera . This is a requirement of the regulation.

This provision has a direct effect on the capacity of the storage system.

For example, an NVR system that provides 15 or 30 days of recording in an ordinary business may not meet the one-year retention requirement for the same number of cameras.

Why Is One-Year Recording Retention Important?

Long-term recording makes it possible to review past movements of goods and related operations when needed.

However, a longer recording period increases the need for:

  • Greater disk capacity.

  • Storage expansion.

  • Data-integrity management.

  • Disk-failure tolerance.

  • Energy consumption.

  • Regular recording verification.

These requirements

Therefore, an bonded-warehouse project should focus not only on the number of NVR channels, but also on the actual usable storage capacity for one year of recording should be the focus.

How to Calculate HDD Capacity for an Bonded-Warehouse Camera System?

The most important parameter in calculating storage is the average bitrate of the video stream.

Even with the same number of cameras and the same resolution, video sizes can vary because of differences in compression and viewing conditions.

Recording Capacity Formula

For continuous recording 24 hours a day:

Total recording (TB) = Number of cameras × Average bitrate (Mbps) × 10.8 × Number of days / 1,000

Here, TB denotes the decimal terabyte unit.

Example: An Bonded Warehouse with 24 Cameras

Assume that each of the 24 cameras continuously records for 365 days at an average bitrate of 3 Mbps.

Parameter

Value

Number of cameras

24

Average bitrate per camera

3 Mbps

Total average video stream

72 Mbps

Daily data

777.6 GB

30 days of data

23.33 TB

365 days of data

283.82 TB

with a 20% planning reserve

340.59 TB

SAMPLE RECORDING CALCULATION

One year of video data

283.82 TB

Capacity target with a 20% reserve

340.59 TB

24 cameras · Average 3 Mbps · 365 days · 24/7 recording. Illustrative calculation; RAID and usable capacity should be assessed separately.

This calculation shows only the theoretical volume of video data.

In an actual project, the codec, scene activity, audio and metadata streams, recording-system file structure, and storage redundancy should be assessed.

The 20 percent capacity reserve is an engineering assumption used for this example; it is not a fixed percentage mandated by regulations for all systems.

RAID 5 and RAID 6 in Bonded-Warehouse Camera Systems

Under Ek-80/III, for storing camera recordings, at least RAID 5 or RAID 6 is required.

RAID enables multiple disks to be used together in a specific storage configuration.

What Is RAID 5?

Using parity information, RAID 5 can provide resilience to a single disk failure in a suitable disk configuration.

What Is RAID 6?

In a suitable disk configuration, RAID 6 can provide resilience to the failure of two disks.

Feature

RAID 5

RAID 6

Minimum number of disks

3

4

Disk failure tolerance

1 disk

2 disks

Parity capacity

Equivalent to 1 disk

Equivalent to 2 disks

Capacity efficiency

May be higher

Uses more disk capacity

Key risk

Additional failure during rebuilding

Rebuild and performance risks remain

RAID 6 Capacity Calculation

For example, assume that 18 disks with a nominal capacity of 24 TB each are used in a RAID 6 configuration.

Theoretical nominal capacity:

(18 − 2) × 24 TB = 384 TB

This is the theoretical RAID capacity before deducting file-system and other system requirements.

Although the target of 340.59 TB above may appear to be met, actual usable capacity, controller limits, rebuild time, and recording performance should be verified before purchase.

Important: RAID is not a substitute for a backup system.

Additional protection measures may be needed against accidental deletion of recordings, software errors, ransomware, damage to the recording device, or other incidents.

Should You Choose an NVR or a Server-Based VMS?

The recording-device architecture for bonded-warehouse camera systems should be selected according to the number of cameras and the retention period.

NVR-Based System

Suitable NVR devices can be used in bonded-warehouse projects of a certain scale.

However, the capacity for one year of recording and RAID requirements may exceed the disk-bay or recording-performance limits of a single device.

Server-Based VMS

VMS-based solutions can operate with multiple recording servers and a suitable centralized storage architecture.

They can be considered particularly for large bonded warehouses.

Hybrid Recording Infrastructure

Some systems can combine local recording, centralized management, and archiving functions.

However, it must be separately verified that this architecture meets the applicable recording-retention and access requirements.

Criterion

NVR

Server/VMS

Camera management

Depends on device capacity

Depends on licensing and server capacity

Storage

Internal/compatible external disk infrastructure

Centralized or distributed storage

RAID

Depends on the model

Depends on the storage design

One-year recording

If capacity is sufficient

With a suitable archive architecture

System expansion

Depends on hardware limits

Depends on the architecture

Centralized monitoring

Depends on the model

Can be extensive

Maintenance

Device and disk maintenance

Server, software, and storage maintenance

When selecting suitable recording infrastructure for a bonded warehouse, capacity and system continuity—not just the initial purchase price—should be the basis for the decision.

Why Is a UPS Needed in Bonded-Warehouse Camera Systems?

Ek-80/III includes a requirement to connect camera and recording systems to an uninterruptible power supply.

However, installing a UPS only for the recording device may not ensure power continuity for the entire system.

For example, if the NVR is running but the PoE switch loses power, video may no longer be received from the cameras.

Therefore, power backup should cover the following:

  • Camera power supply.

  • PoE switch.

  • NVR or recording server.

  • Storage system.

  • Network equipment.

  • Alarm communication components.

should be considered together.

How Should UPS Capacity Be Calculated?

For example, assume that the total average consumption of all critical components is 500 W.

Theoretical energy requirement for two hours:

500 W × 2 hours = 1,000 Wh

However, this calculation is not sufficient to select an actual UPS and battery.

The battery's usable capacity, conversion losses, ageing, ambient temperature, and manufacturer performance tables should also be examined.

The UPS requirement in Ek-80/III should not be taken to mean that the same number of hours of backup is required for all bonded warehouses.

Tamper Detection in Bonded-Warehouse Camera Systems

Monitoring camera failures and tampering incidents in bonded warehouses is an important requirement.

The general features section of Ek-80/III defines alert mechanisms for changes to a camera's angle, obstruction of its image, or similar interference.

Examples include:

  • Obstruction of the camera's field of view.

  • Changing the camera's direction.

  • Degradation of focus or image quality.

  • Physical tampering with the camera.

  • Configured alarm events.

are examples.

To Whom Should Tamper Alerts Be Sent?

The relevant regulation contains provisions for reporting certain alarm and tamper events to:

  • The customs directorate.

  • The bonded-warehouse operator.

  • Relevant personnel.

by email.

This function should not be deemed verified solely by the camera's advertised “tamper detection” feature.

During site acceptance testing, the email service's operation, correct identification of recipients, and actual delivery of notifications should be checked.

Should Recording Interruption Be Monitored as a Separate Alarm?

Yes, this is recommended from a technical standpoint.

Recording may stop even while a camera appears online.

For this reason, professional projects should also monitor:

  • Recording-stream interruption.

  • HDD failure.

  • RAID failure.

  • Disk capacity reaching a critical level.

  • NVR service failure.

  • Loss of server connection.

  • Time synchronization problem.

Monitoring such conditions is beneficial.

Some of these functions support the general alarm requirements in the regulations, while others are additional engineering recommendations for recording continuity.

Consequences of Missing Bonded-Warehouse Camera Recordings

A significant risk in bonded-warehouse camera systems is the unavailability of historical recordings.

In this regard, the General Directorate of Customs of the Ministry of Trade letter dated 28 June 2024, No. E-40216608-131.99-00097626909 contains important clarifications.

The letter states that recording loss has occurred because of failures in bonded-warehouse camera systems, and that different assessments have been made in applying certain administrative sanctions.

The clarification addresses the procedure for identifying and assessing the relevant deficiency in technical equipment.

It also explains that, if failure to meet the technical conditions is deemed serious negligence, the relevant regulations may lead to a ban on admitting goods into the bonded warehouse until the deficiency is remedied.

Therefore, a recording interruption may be not merely a technical fault for bonded-warehouse operators, but a non-compliance that could have administrative and operational consequences.

However, it cannot be said that every recording interruption automatically results in the same fine or the same sanction.

The assessment of sanctions depends on the specific circumstances, the current regulations, and the findings of the competent authority.

ONVIF Requirement in Bonded-Warehouse Camera Systems

The text of Ek-80/III ONVIF Full Member (Full Member) as a stated term.

However, an important technical distinction must be made.

ONVIF membership is the membership status of a manufacturer or organization within the ONVIF organization.

ONVIF product conformance concerns whether a specific camera or software product conforms to specific ONVIF profiles.

A manufacturer's ONVIF membership does not mean that all the cameras it sells are ONVIF-compliant.

According to ONVIF's official statements, product conformance is assessed by specific model and firmware version.

How Is ONVIF Compatibility Checked?

  • The manufacturer's membership status should be checked.

  • The camera's exact model code should be identified.

  • The official database of ONVIF-compliant products should be consulted.

  • The profiles supported by the product should be verified.

  • The relevant firmware version should be checked.

  • A functional test should be conducted using NVR/VMS.

Since manufacturer membership and product conformance are different, how the wording in Ek-80/III should be applied in the technical specification should be clarified with the competent authority.

Moreover, the removal in 2024 of the requirement for the same manufacturer does not eliminate the need to verify technical compatibility between products.

Night Vision in Bonded-Warehouse Camera Systems

It may be necessary to monitor bonded-warehouse areas at night or in low-light conditions.

Ek-80/III contains requirements for day/night operation, mechanical IR Cut, low-light performance, and infrared illumination in entrance and exit areas.

The section on cameras capturing entrances and exits also specifies a minimum IR night-vision range of 30 meters.

However, a camera’s catalog-listed 30-meter IR range does not mean that every target at a distance of 30 meters can be reliably distinguished.

Actual performance:

  • the lens’s field of view,

  • target size,

  • the distribution of IR illumination,

  • the camera sensor’s sensitivity,

  • outdoor conditions,

  • image compression,

  • and installation position,

among other factors.

Daytime and nighttime images should be tested separately, particularly in open bonded-warehouse yards.

Camera Systems in Fuel Bonded Warehouses

Fuel bonded warehouses and some warehouses storing special-category goods have additional camera-placement requirements.

The relevant special section of Ek-80/III contains provisions on positioning cameras to cover:

  • vehicles entering and leaving the facility,

  • areas where vehicles are loaded,

  • goods dispatch manifold points,

  • collector areas, if any,

  • berthing platforms, where possible,

  • and areas where meter systems are located.

The provisions require the cameras to be positioned to capture these areas.

Are Explosion-Proof Cameras Required?

At facilities where there is a risk of a flammable or explosive atmosphere forming, the suitability of cameras and other electrical equipment must be assessed separately.

Hazardous-area classification and applicable ATEX/IECEx requirements are important in such areas.

However, it cannot be said that every camera in every fuel bonded warehouse must have the same explosion-proof rating.

Products should be selected according to the classification of the relevant area and the facility’s engineering requirements.

Audio Recording and the KVKK in Bonded-Warehouse Camera Systems

The section on minimum technical specifications in Ek-80/III contains provisions concerning audio transmission and recording capabilities.

A camera’s audio capability and the continuous recording of conversations in an area are different matters.

Under Personal Data Protection Law No. 6698, the purpose, legal basis, necessity and proportionality of personal-data processing must be assessed.

The Personal Data Protection Authority’s notice concerning workplace camera systems dated 8 June 2026, regards recording ambient sound as a particularly intrusive method.

Accordingly, technical provisions on audio support in regulations should not be interpreted to mean that the microphones of all bonded-warehouse cameras must be activated unconditionally.

The necessity and legal permissibility of audio recording should be clarified by considering the relevant customs regulation and personal-data protection legislation together.

In addition, only authorized persons should be able to access video recordings; access and other operations should be logged, and recordings should not be shared without authorization.

Remote Access in Bonded-Warehouse Camera Systems

Ek-80/III includes requirements for remote access and viewing certain past recordings.

The general features section includes a function for viewing recordings remotely going back at least seven days.

This requirement does not mean that recordings may be retained for only seven days.

One-year recording retention and the ability to view recordings remotely for at least seven days are different requirements.

The remote-access infrastructure should be assessed for:

  • authorization,

  • secure network connections,

  • access logs,

  • user-specific permissions,

  • searching and playing recordings,

  • network-outage scenarios,

  • and system security,

each separately.

Exposing an NVR or VMS system to the internet without controls is not a secure practice.

Periodic Maintenance and Validation of Bonded-Warehouse Camera Systems

One of the most important operational requirements for bonded-warehouse camera systems is maintaining uninterrupted recording.

The presence of a camera image on a monitor does not mean that past recordings are complete.

For this reason, periodic maintenance should test not only viewing but also recording and alarm functions.

Periodic Technical Checks

  • Camera field of view

  • Day and night image quality

  • Focus

  • Tamper detection

  • Recording interruptions

  • RAID and HDD health

  • UPS and battery status

  • Email alarm notifications

  • User permissions

  • Remote recording playback

  • Recording export

  • Time synchronization

  • Checking the oldest accessible date in the recordings

What Is Recording Validation?

Recording validation is the process of testing whether the system meets its intended recording and access requirements under real-world conditions.

For example, finding footage from 365 days earlier does not, by itself, prove that the camera in question recorded continuously.

There may be gaps in the recordings between dates and times.

Recording continuity should therefore be assessed together with sampling methods and system logs.

Sample Technical Specification for Bonded-Warehouse Camera Systems

The table below is a preliminary project summary that combines regulatory requirements with additional engineering checks for implementation.

Technical requirement

Sample specification approach

Camera type

Suitable IP camera

Entrance and exit cameras

At least 1080p, 15 FPS

Inspection/handling cameras

At least 1080p, 15 FPS

General surveillance cameras

At least 720p, 10 FPS

Recording period

One year within the applicable scope

Storage

RAID 5 or RAID 6

Power

UPS-backed system

Night vision

Applicable IR and low-light requirements

Tamper detection

Must meet the warning-function requirements in the regulations

Notifications

Email to required recipients

Remote access

At least seven days of playback

ONVIF

Membership and product compatibility must be verified separately

Recording health monitoring

Recommended additional operational check

Cybersecurity

Permissions, secure access, updates

Site acceptance

Day/night, recording, alarm and outage tests

This table does not reproduce all provisions of Ek-80/III.

When preparing the final technical specification, all current sections of the regulation, the type of bonded warehouse and the specific conditions of the relevant authority should also be examined.

Installation and Acceptance Checklist for Bonded-Warehouse Camera Systems

  • Have the bonded warehouse’s legal category and applicable camera obligations been verified?
  • Has the current Customs Regulation Ek-80/III been reviewed?
  • Have the former Ek-81/B specifications been compared with the current text?
  • Was the same-manufacturer requirement, repealed in 2024, checked?
  • Are the entrance and exit areas covered?
  • Are inspection and handling areas covered?
  • Are the required resolution and FPS values met?
  • Have blind spots in open areas been assessed?
  • Have camera lenses and image detail been tested?
  • Have night vision and IR performance been verified?
  • Is the recording system suitable for one year of retention?
  • Has the RAID 5/6 configuration been verified?
  • Have RAID failures and disk alerts been tested?
  • Do the cameras and recording infrastructure operate through a UPS?
  • Are email tamper notifications actually being delivered?
  • Have alarm notification recipients been correctly configured?
  • Has the recording-interruption monitoring mechanism been tested?
  • Have ONVIF manufacturer membership and product compatibility been verified?
  • Has the function for remotely viewing past recordings been tested?
  • Have recording exports and user activity logs been checked?
  • Have the system clock and time synchronization been verified?
  • Have KVKK and audio-recording requirements been assessed?
  • Have additional camera points for special bonded-warehouse areas been checked?
  • Have commissioning and acceptance tests been documented?
  • Has a periodic maintenance and recording-validation plan been established?

Frequently Asked Questions About Bonded-Warehouse Camera Systems

Are camera systems mandatory in bonded warehouses?

Customs Regulation Ek-80/III defines technical requirements for camera systems in the relevant bonded warehouses. However, since exceptions may apply depending on the type of warehouse and special regulations, applicable obligations should be verified for each project.

Which annex contains the bonded-warehouse camera-system specifications?

In current consolidated legal sources, the bonded-warehouse camera-system requirements in Customs Regulation Ek-80/III section.

How many megapixels should bonded-warehouse cameras have?

For relevant entrances, doors, inspection and handling points, the requirement is at least 1080p; for general monitoring points in open and enclosed areas, it is at least 720p. The image must also be assessed to ensure it provides sufficient detail.

At what FPS should bonded-warehouse cameras record?

The specified rates are at least 15 FPS at relevant critical points and at least 10 FPS in general monitoring areas.

How many days are bonded-warehouse camera recordings retained?

Ek-80/III requires the relevant camera recordings to be retained for one year from the date of recording.

Is RAID mandatory in a bonded-warehouse NVR system?

The relevant regulation specifies that at least RAID 5 or RAID 6 must be used to store camera recordings.

Is a UPS required for bonded-warehouse camera systems?

Ek-80/III requires camera and recording systems to be connected to an uninterruptible power supply.

Must all cameras be the same brand?

Article 24, which contained the former requirement to use the same manufacturer, was repealed by a regulation dated 20 April 2024. However, the actual technical compatibility of different brands must still be verified.

Is ONVIF mandatory for bonded-warehouse cameras?

Ek-80/III includes the phrase “ONVIF Full Member.” Since manufacturer membership and a camera model’s ONVIF compliance are different concepts, product selection should take this distinction into account.

What happens if a bonded-warehouse camera system fails?

Loss of regulatory compliance may lead to sanctions or restrictions on certain operations, depending on the specific circumstances and administrative findings. The Ministry of Trade’s letter dated 28 June 2024 contains important clarifications concerning recording deficiencies.

Must bonded-warehouse cameras record audio?

The technical specifications section of the regulation contains provisions concerning audio functions. However, the legality of continuously recording ambient sound must be assessed separately under KVKK and other relevant legislation.

Are explosion-proof cameras required in fuel bonded warehouses?

Depending on the hazardous-area classification, suitable explosion-proof or other certified equipment may need to be used. It should not be assumed that the same specifications are mandatory for every camera location.

How are bonded-warehouse camera-system prices determined?

The costs of cameras, lenses, recording duration, RAID storage capacity, UPS, network infrastructure, software, installation and maintenance should be calculated together. The one-year recording requirement in particular can significantly affect the total cost.

Conclusion: The Right Regulatory and Engineering Approach to Bonded-Warehouse Camera Systems

Bonded-warehouse camera systems are important technical infrastructure that supports the security of goods under customs supervision and the traceability of related operations.

In Türkiye, Customs Regulation Ek-80/III sets specific requirements concerning matters such as camera placement, resolution, frame rate, recording period, RAID, UPS, tamper notifications and remote access.

In particular, a one-year recording period requires the storage architecture to be properly designed.

However, high disk capacity or high-resolution cameras alone are not enough. The system must be able to record under actual operating conditions, provide the necessary image detail, report faults, and preserve access to recordings.

A properly designed bonded warehouse camera system is one that complies with current regulations, has verified recording integrity, includes safeguards against interruptions, and is maintained through periodic servicing to ensure sustainability.

For this reason, bonded warehouse security projects should be guided first by the current regulatory framework, compliance with technical specifications, storage engineering, and acceptance testing—not by equipment prices.

References

More on the topics covered in this piece

Cookie preferences

Essential storage supports site features and remembers your choice. Consent-based Google analytics depends on your choice and separate activation. Advanced Mode is off by default; if separately enabled, it may send cookieless signals under denied consent. If activated, Umami measures pageviews independently of cookie choices. Read the Cookie Policy

Essential — always active

Session security and remembering your cookie preference.

Usage measurement for pages, searches and sponsor interactions; Google Analytics / Google Tag Manager when configured.

Use of advertising-related cookies. Contextual sponsor placements may still appear without this permission.

Preference for sharing user data with Google advertising services. No such transfer occurs unless separately enabled.

Preference for Google ad personalization, independent of analytics permission.

You can change or withdraw your choices using Cookie preferences in the footer.